That’s it. That’s the post.

        • PolandIsAStateOfMind@lemmygrad.ml
          link
          fedilink
          English
          arrow-up
          24
          ·
          2 months ago

          Considering the shit our current corpos would do to your brain most of the “dystopian” visions from old cyberpunk sounds pretty optimistic.

        • roux [he/him, they/them]@hexbear.net
          link
          fedilink
          English
          arrow-up
          20
          ·
          2 months ago

          Tbf, there is a small gorup of DIY bio-hackers somewhere out there. I saw a doc about it a few years ago. Nothing like super major but like installing an NFC chip in a hand and stuff.

                • Strayce@lemmy.sdf.org
                  link
                  fedilink
                  English
                  arrow-up
                  6
                  ·
                  edit-2
                  2 months ago

                  Not an electrician but I have one of these. While I have used it to troubleshoot electrical problems on occasion (eg- this thing doesn’t have a power LED but I can tell it’s getting power), it’s far more useful for locating and holding small screws. The field sensing bit is somewhat hit and miss. Mine works on microwave ovens, most transformers, some models of anti-theft gate, an electric tram once or twice, and on one occasion, a laptop WiFi card.

      • DragonBallZinn [he/him]@hexbear.net
        link
        fedilink
        English
        arrow-up
        21
        ·
        2 months ago

        That’s so accurate, but landlords have jacked up rent so cities are little luxury zones for the rich only so only they can enjoy the few cool things about cyberpunk while I’m stuck living like a medieval peasant in bumfuck nowhere Ohio.

        • roux [he/him, they/them]@hexbear.net
          link
          fedilink
          English
          arrow-up
          10
          ·
          2 months ago

          First I don’t wish Ohio on anyone, even my worst enemies.

          That still tracks. Us poors can’t even afford the disassociation treats that the movies and books suggested that the cyber-poors would be enjoying. I just wanna be the homeless guy with the beanis-pump gooning himself with VR in the first episode of Edgerunners. Is that too much to ask?

    • Frank [he/him, he/him]@hexbear.net
      link
      fedilink
      English
      arrow-up
      43
      ·
      2 months ago

      The pumps have little screens on the that play adds and yell at you. They used to just use speakers to play the adds to the whole complex, but now they’re right in your face. There’s lots of surveillance, too, since they want to be able to prosecute you if you somehow manage to get gas without paying. It makes sabotaging the screens complicated.

        • Frank [he/him, he/him]@hexbear.net
          link
          fedilink
          English
          arrow-up
          16
          ·
          2 months ago

          We need a commercial point of sale sabotage manual. Like we need to comb through the repair manuals for all these things, all these advertising machines, and determine how they can be disabled quickly, quietly, and with minimal evidence by the “end user”.

          • aaaaaaadjsf [he/him, comrade/them]@hexbear.net
            link
            fedilink
            English
            arrow-up
            12
            ·
            edit-2
            2 months ago

            That’s one of the reasons some advertising and ATMs have switched to panel speakers, there’s no requirement for vent holes for the sound to escape, so it’s pretty much impossible to vandalise. A physical part of the gas pump or ATM becomes the speaker, by being energised by an audio exciter stcuk to the back side of it. If you see something producing sound with no obvious speaker holes, it’s probably using a DML exciter. It’s actually a very interesting technology, a shame it’s being used in advertising.

              • aaaaaaadjsf [he/him, comrade/them]@hexbear.net
                link
                fedilink
                English
                arrow-up
                10
                ·
                edit-2
                2 months ago

                That could make it louder. I’ve built my own set of DML panel speakers, and coating the outside of the panels in a coat of PVA glue enhanced the high frequency sound. If there’s good connection between the epoxy and the surface, and the exciter is powerful enough to energize it with the extra mass of the epoxy, it will still work. Some people even coat their panels in expoy to try enhance the sound in a similar manner to coating in PVA glue. You would have to get the epoxy jammed in on the side with the exciter, which is usually not accessible.

              • Ferrous@lemmy.ml
                link
                fedilink
                English
                arrow-up
                5
                ·
                2 months ago

                Exactly where my head went, but with expanding spray foam to get in and out quickly. Don’t know if that would even defeat these panels though.

        • Chronicon [they/them]@hexbear.net
          link
          fedilink
          English
          arrow-up
          11
          ·
          2 months ago

          yeah, I genuinely thought about trying to figure out where the essential components of those were so I could pop a little hole in them with a drill but I decided to stop driving for like a year instead