Found it. Since the gas goes through the same hose as the other blends, if you’re buying gas you need to get at least 4 gallons so the previous gas flushes out what was left in the hose from the previous sale, and fills enough of the container that the blend is primarily what you selected.
If you buy E15 and fill your tanks, then the next guy buys E10 and only gets 1 gallon, they might end up with a higher ethanol mix than intended, and if they use that on a small motor, like a chainsaw, it could ruin the seals.
Found it. Since the gas goes through the same hose as the other blends, if you’re buying gas you need to get at least 4 gallons so the previous gas flushes out what was left in the hose from the previous sale, and fills enough of the container that the blend is primarily what you selected.
If you buy E15 and fill your tanks, then the next guy buys E10 and only gets 1 gallon, they might end up with a higher ethanol mix than intended, and if they use that on a small motor, like a chainsaw, it could ruin the seals.
I’m in Europe and I have never in my life seen a gas station that dispenses every fuel through just one hose.
Every fuel has its own hose and “pistol”. Each “pump” has two or three or four hoses.
In America, if a corner exists a company will cut it.
It feels like blending hoses would be a more complicated setup?
I’m not from the US so my biggest surprise here is that you don’t get separate hoses for each grade.
Imagine getting Diesel in Germany. “Sorry, that was actually 15 liters of regular gas. ¯_(ツ)_/¯”
Edit: Ok, it’s not as bad as I imagined, since this picture seems to be about E15/E10, not diesel/regular.
diesel absolutely DOES get a separate hose, every time