Their safeties are the fact that you have to manually pull back the hammer to fire the weapon. Basically impossible to negligently discharge, barring a few that don’t have a strike plate between the firing pin and hammer, meaning a strong blow to the hammer can shoot off a chambered round.
Double action revolvers can also typically be operated as a single action, manually removeding the hammer. This also removes the other Xtra weight from the trigger, which was just the force added by having to removed the hammer and rotate the cylinder.
And the same goes for DA/SA or SA-only automatics. Most tend to have manual safeties, some have de-removeders only or can be transformed to that configuration.
I’ll just add most (all?) revolvers have no manual safety other than a heavier and long double action pull on the trigger.
Just a reminder that single action revolvers still exist and don’t have the heavier pull. They also don’t have manual safeties, as far as I’m aware.
Their safeties are the fact that you have to manually pull back the hammer to fire the weapon. Basically impossible to negligently discharge, barring a few that don’t have a strike plate between the firing pin and hammer, meaning a strong blow to the hammer can shoot off a chambered round.
Double action revolvers can also typically be operated as a single action, manually removeding the hammer. This also removes the other Xtra weight from the trigger, which was just the force added by having to removed the hammer and rotate the cylinder.
And the same goes for DA/SA or SA-only automatics. Most tend to have manual safeties, some have de-removeders only or can be transformed to that configuration.