Also, I think that mirrors the marketshare of devices used to browse the Internet. More and more phones, less and less computers.
Also, I think that mirrors the marketshare of devices used to browse the Internet. More and more phones, less and less computers.
It’s way more exhaustive actually ! https://books.google.fr/books?id=7mWeBQAAQBAJ&pg=PA97&hl=fr&source=gbs_selected_pages&cad=1#v=onepage&q&f=false
From my point of view : it has a hudge ecosystem with tons of robust libraries. This does not make it perfect, but for an industrial point of view, you don’t look for new shiny clean things. (My point of view is 15 years old yet…)
I wanted to know the date of this comic. It was issued in Eightball #5, February 1991.
24 (TV series) is like this if I remember well. The daughter would have had a cellphone now.
I just measured it and the overhang behind is half the bed and half the infamous cable. You need around 60cm between the front feet and the wall behind, for the cable not to be torn when the bed is all the way to the back.
The bed goes back and forth. On the back, you need the place since there is the infamous cable that should not be torn. On the front, the bed can go over the void. There is no need for a 70 cm large table, maybe 50cm with overhang.
It’s a mess. I have the A1 with AMS and it takes way more space than I wanted. The coreX with AMS are way more compact.
Edit.
Wide 80cm (with the poop chute on the left and the AMS on the right)
Depth 70cm (with all the cables and the bed going back and forth)
Height 60cm with the top roll
I would like to get one for our club but I can’t understand the wide variety of prices. $150 ? $500 ? $2000 ? $10000 ? $75000!! ? What’s the cheapest that is not a pain to use ?
What slicer is it ? I will check if it is possible to set no purge at all in BambuStudio - since I have an AMS lite.
It looks feasible with a purge multiplier set to 0. https://forum.bambulab.com/t/setting-an-unbeatable-record-no-flush-at-all/51052/4
I say to people : if you’re interested in 3D printing, you need two hobbies. 3D printing and anything else. The second hobby can be repairing things, a sport (spearfishing for me), board games, electronics, etc.
I started with a 100€ very small 3D printer for years (Tina2) and that was so worth it. Now I have a Bambulab with AMS and it’s night and day.
Yes. It breaks points.
It looks like AI images. Perfect woman with a big smile and doing a strange thing.
I agree with the other comments. Yet, it’s a beautiful design. What software do you use ?
As a French, it’s not in our culture these “imaginary friends”. Kids don’t have them (at least I don’t know anyone that used to have one), we don’t speak about it, we don’t have stories and fairy tales about them…
I think it’s an American thing. The new movie “IF” is uncanny for me - It’s like the girl is batshit insane and I was waiting for a twist with here being in a psychiatric hospital or something.
In Europe, we changed to the Euro not that long ago. I was a student and I used to use a shared laundry machine. It was the day before returning to school. I was barely alone in the dorms. Let’s do a laundry !
The machines were updated to get euros. There was another machine just to change the coins, especially since the washing machines only took one kind of coin (20 cents).
I put one fresh euro in the exchange machine, expecting to get 5 coins of 20 cents.
Tching. Tching. Tching. Tching. Tching. <pause>… Tching. Tching. Tching. Tching. Tching. <pause>… Tching. Tching. Tching. Tching. Tching. <pause>…
What ?! The machine was buggy and would not stop. I grabbed a hoodie to put the coins in it. Soon, it was not enough. After what seems to be an eternity I was there with around 50€ and kilos of coins.
From the center to the borders, due to rain.
The thing is, harmful apps are now difficult to detect compared to years ago. The hackers prefer to get the control of your device without ruining it.
And Barbie. What a spin-off !
Nice !
I would go with wood filament.