Sometimes the RCA is quick, especially if you’re pushing updates to the units that failed.
I’ve taken out the entire network for my job a few times before, and the RCAs were “accidentally plugged a normal cable into a switch port”, and “accidentally applied an any/any deny rule to the firewall.”
Sometimes the RCA is quick, especially if you’re pushing updates to the units that failed.
I’ve taken out the entire network for my job a few times before, and the RCAs were “accidentally plugged a normal cable into a switch port”, and “accidentally applied an any/any deny rule to the firewall.”
In both cases, the root cause was obvious.
But that is the cause of the failure not the root cause.