The Crane WASP, also known as "the infinity 3D printer," uses locally sourced clay, mud or cement to 3D-print affordable homes. It can even use agricultural waste as aggregate. The system is now being used to build much-needed housing in Colombia.
These are gadget huts. It’s made of techno-hopium material.
They’ll want money to do this in some poor rural area in a place where they can hardly name the native language. They think this will help poor people, but ignore the part where humans have always built shelters. If they fail to transfer the technology and know-how, then this technology is, over time, totally useless. And they will fail because such tech is usually patented and protected by IP laws.
If they try to sell this in the richer parts of the World, all they will do is make the environment and climate worse by promoting more suburban sprawl.
Yep. The cheaper and easier solution to extreme housing issues is a few pallets of bricks and some mortar. This company is on a marketing campaign to try to get people in rich countries to get excited about buzzwords so they can get funding.
The ones in Texas are built of a “high performance polymer concrete”, so probably including cement and contributing to climate change. They appear to be single storey as well.
Well, quite. They don’t appear to have windows or doors either (doorways, yes, but not doors), and they have holes in the roof. Yet the article mentions “homes” about a million times.
It’s almost like somebody who didn’t have any knowledge of construction had the idea of 3D printing buildings. Probably in the shower.
I notice that they fill the walls with natural fibers by hand (see the photo) - so they must pause the printers at regular intervals and get a ladder to get up to the top parts. So even what we see isn’t entirely 3D printed.
I’m pretty sure about one third of the population of earth would be absolutely ecstatic to call that “home” and we’re very lucky to consider it not to be
Also, this basic concept is how Alpine chalets are built, and they’re incredibly well insulated against cold and heat
You’re being pedantic about the word “home” and whether they’re fully 3D printed, and I’m not sure why. A home is a place where people live, and whether they have windows or doors is not relevant to that point. The point of the design is that they don’t have to have those things, and they’re considering ongoing problems like climate change; the western ideal of a “home” is actually an impractical design when you start to consider the environment as it is.
And yes, they have to infill the insulation. Nobody is claiming these homes are built without human intervention.
Are you just trying to find weird ways to shit on a thoughtful way to help people?
The things they have chosen as demonstrators have holes in the roof! They are not suitable as homes by any reasonable definition. I also think that light and security are necessary for a home. Certainly if you are trying to improve on an existing “subpar dwelling”.
If they wanted to demonstrate how they can 3D print homes in rural Colombia, why didn’t they print something that would be suitable to be a home in rural Colombia? They only had to load a different model into the printer, right?
No reinforcement? What are the upper floors made of?
These are gadget huts. It’s made of techno-hopium material.
They’ll want money to do this in some poor rural area in a place where they can hardly name the native language. They think this will help poor people, but ignore the part where humans have always built shelters. If they fail to transfer the technology and know-how, then this technology is, over time, totally useless. And they will fail because such tech is usually patented and protected by IP laws.
If they try to sell this in the richer parts of the World, all they will do is make the environment and climate worse by promoting more suburban sprawl.
Yep. The cheaper and easier solution to extreme housing issues is a few pallets of bricks and some mortar. This company is on a marketing campaign to try to get people in rich countries to get excited about buzzwords so they can get funding.
The ones in Texas are built of a “high performance polymer concrete”, so probably including cement and contributing to climate change. They appear to be single storey as well.
If you read the article you’ll see they’re more domes than homes
Well, quite. They don’t appear to have windows or doors either (doorways, yes, but not doors), and they have holes in the roof. Yet the article mentions “homes” about a million times.
It’s almost like somebody who didn’t have any knowledge of construction had the idea of 3D printing buildings. Probably in the shower.
I notice that they fill the walls with natural fibers by hand (see the photo) - so they must pause the printers at regular intervals and get a ladder to get up to the top parts. So even what we see isn’t entirely 3D printed.
I’m pretty sure about one third of the population of earth would be absolutely ecstatic to call that “home” and we’re very lucky to consider it not to be
Also, this basic concept is how Alpine chalets are built, and they’re incredibly well insulated against cold and heat
This’ll be world-changing in ten years
You’re being pedantic about the word “home” and whether they’re fully 3D printed, and I’m not sure why. A home is a place where people live, and whether they have windows or doors is not relevant to that point. The point of the design is that they don’t have to have those things, and they’re considering ongoing problems like climate change; the western ideal of a “home” is actually an impractical design when you start to consider the environment as it is.
And yes, they have to infill the insulation. Nobody is claiming these homes are built without human intervention.
Are you just trying to find weird ways to shit on a thoughtful way to help people?
The things they have chosen as demonstrators have holes in the roof! They are not suitable as homes by any reasonable definition. I also think that light and security are necessary for a home. Certainly if you are trying to improve on an existing “subpar dwelling”.
If they wanted to demonstrate how they can 3D print homes in rural Colombia, why didn’t they print something that would be suitable to be a home in rural Colombia? They only had to load a different model into the printer, right?
Bruh, are you for real?
Do you think that these might be some of the subpar dwellings that they’re talking about: https://southamericabackpacker.com/exploring-slums-of-medellin-colombia/ ?
No, I’m not serious. Of course they don’t need roofs or windows or multiple storeys. I’m just joking about that stuff.
That’s what I thought. Bye.