Last weeks thread here

Welcome to this week’s casual kōrero thread!

This post will be pinned in this community so you can always find it, and will stay for about a week until replaced by the next one.

It’s for talking about anything that might not justify a full post. For example:

  • Something interesting that happened to you
  • Something humourous that happened to you
  • Something frustrating that happened to you
  • A quick question
  • A request for recommendations
  • Pictures of your pet
  • A picture of a cloud that kind of looks like an elephant
  • Anything else, there are no rules (except the rule)

So how’s it going?

  • Dave@lemmy.nzOPM
    link
    fedilink
    arrow-up
    4
    ·
    4 months ago

    I know a few people around here are running Home Assistant and the like. I’m keen to put in a few cameras, preferably not cloud connected but that can connect to Home Assistant. I’m planning on adding object detection via coral.

    I’m thinking cameras powered by PoE. Anyone got suggestions for outdoor cameras?

    What about a switch that outputs PoE and doesn’t cost thousands? Maybe something like this? Though I don’t seem to see good bang for buck switches where they are all PoE, they seem to just do half of the ports PoE though 8 PoE ports seems like it would be plenty.

    And on another note, any suggestions for a network level VPN client? That is, for connecting the home nenetwork to an external VPN server (one that handles hundreds of Mbps, preferably wireguard). Is something like this appropriate? It’s CPU is only 1Ghz so I worry it will be slow.

    • kurikai@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      4 months ago

      I have a poe managed ubiquity switch and use reolink Poe cameras and reolinks Poe doorbell. Home assistant has great support for reolink; It’s also local. I have home assistant save the streams on motion detection to a network mounted drive in home assistant

      • Dave@lemmy.nzOPM
        link
        fedilink
        arrow-up
        3
        ·
        4 months ago

        That’s awesome, looks like PB Tech have a huge range of Reolink!

        But with choice comes more questions 😆. PoE means you don’t need separate power for the camera. But it looks like they sell solar powered wifi ones. Is there a benefit of using PoE instead of wifi+solar?

        • kurikai@lemmy.world
          link
          fedilink
          arrow-up
          4
          ·
          4 months ago

          Well worth running Poe if you can. Poe can also power some wifi access points(I use ubiquity sps I bought cheap on trademr), so you can hide them in your roof space.

          • Dave@lemmy.nzOPM
            link
            fedilink
            arrow-up
            2
            ·
            4 months ago

            It just sounds like so much work 😆. How does the actual running of PoE work? Do I measure the distance at say 18m then buy a 20m cable to use, or am I buying a big roll, cutting it to size, and adding the plug on the end? (And if the latter, how do I do that?)

            Do I have to be careful about which cable I get to make sure it supports PoE, or can I grab any cat5 or cat6?

        • Panq@lemmy.nz
          link
          fedilink
          arrow-up
          3
          ·
          4 months ago

          The solar/battery models don’t run 24/7 - you can trigger them remotely (so you can check the live feed whenever) or they can trigger with motion. Still perfectly useful for a bunch of use cases (e.g. just checking if you closed something, or installed somewhere that motion sensing is reliable like a low-traffic corridor) but not super useful for, say, a front door.

      • Panq@lemmy.nz
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        4 months ago

        Just to second this - I’ve upgraded all but one camera to Reolink RLC-810A a few years back and they’re rock solid. All offline (no internet, but connected to Home Assistant on a separate LAN), all powered by a cheap unmanaged PoE switch from PB Tech. (Edit: this one).

        They’re recording 24/7 to their local memory, but I almost entirely use them via Home Assistant’s ability to pull a JPEG directly from the camera (because it takes a fraction of a second at 4k vs the unbearable pain of waiting >10s for video to buffer even at SD resolution).

        • Dave@lemmy.nzOPM
          link
          fedilink
          arrow-up
          1
          ·
          4 months ago

          Oh wow, it’s a PoE switch where it’s all PoE, instead of only half!

    • deadbeef79000@lemmy.nz
      link
      fedilink
      arrow-up
      3
      ·
      4 months ago

      From what I’ve encountered, that CPU will probably be just fine unless it’s doing a lot of other stuff too.

      I’ve also noticed that PoE switches that aren’t crippled sme how are rare as hens teeth for consumer grade gear. I.e. only some ports, or only support one of the protocols,or are themselves really picky about supply voltage.

      My only recommendation is to take the time to figure it all out: and if a fact is omitted assume the worst.

      • Dave@lemmy.nzOPM
        link
        fedilink
        arrow-up
        2
        ·
        4 months ago

        Thanks for the reply!

        From what I’ve encountered, that CPU will probably be just fine unless it’s doing a lot of other stuff too.

        I had a bit more of a search around, and it seems this specific UXG-Lite is giving people speeds around 30 or 40Mbps. For a whole of network VPN, that’s nowhere near fast enough! I’m looking for 200Mbps, preferably more.

        This one claims 393Mbps with wireguard. I was earlier reading that you should look for a dedicated VPN box not a wifi/all in one thing but this seems to be pretty good value for money if it works. I don’t need the wifi as I have a couple of mesh access points but I’ll take it if it’s there.

        I was looking at Ubiquiti as the wifi mesh is an Amplifi one but searching around it seems all the Ubiquiti gateways have really bad VPN performance.

        I’ve also noticed that PoE switches that aren’t crippled sme how are rare as hens teeth for consumer grade gear. I.e. only some ports, or only support one of the protocols,or are themselves really picky about supply voltage.

        My only recommendation is to take the time to figure it all out: and if a fact is omitted assume the worst.

        I’m not sure I have the knowledge to figure it all out 😆. How will I know if it’s going to be picky about voltage? What PoE protocols should I be looking for, I didn’t realise there were options 😆

    • thevoyagekayaking@lemmy.nz
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      I have a Ubiquiti Dream Machine SE, which has POE built in, but your option would be the next simplest option.

      All the Ubiquiti gear is very well priced, and dead simple to use, I plan to add some cameras at some point to the system.

      • Dave@lemmy.nzOPM
        link
        fedilink
        arrow-up
        1
        ·
        4 months ago

        Do you use the Dream Machine as a VPN client? I see mixed information online as to whether you can use it as a client or only as a server. If I could knock off two birds with one stone that would be great.

          • Dave@lemmy.nzOPM
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            4 months ago

            From the official page it says it does OpenVPN as a client (as in you can connect to a VPN service to hide your whole network’s browsing habits) but WireGuard is only listed as a server (connect to your network from outside your home). But it seems there might have been a software update to some models to support Wireguard as a client.

            OpenVPN is apparently much slower than Wireguard and wouldn’t get the speed I’m looking for.

            What are you using the gateway for currently?

            • thevoyagekayaking@lemmy.nz
              link
              fedilink
              arrow-up
              2
              ·
              4 months ago

              At the moment it’s just running as a router and PoE switch, with two wireless access points on it. We plan to add cameras, but other expenses have taken priority.

              • Dave@lemmy.nzOPM
                link
                fedilink
                arrow-up
                2
                ·
                4 months ago

                When you say router, does it plug into your fiber box completely replacing where an ISP router would sit? I have suspicions our ISP router is shit (more shit than usual) so have been looking to replace that as well.

                  • Dave@lemmy.nzOPM
                    link
                    fedilink
                    arrow-up
                    2
                    ·
                    4 months ago

                    Nice, if I work out that it supports Wireguard as a VPN then I’ll definitely consider one of these! Thanks for the suggestion!