Yes I am aware that they’re somehow supposed to reduce plastic waste because the cap can’t get lost … unless you cut it off, of course.

Yes I am also aware that there are people with disabilities (shaky hands, weak grip, etc.) who are thankful for these and actually like the design. Good for them, and I mean that in a non-sarcastic way.

But personally, I hate these things with all the “first world problems” rage I can muster and go out of my way to rip / cut / twist them off on every single bottle I buy. I don’t like having the bottle cap directly in my face while drinking, or slipping in the way of the flow whenever I just want to pour milk, and on more than one occasion, I’ve actually cut my finger OR lip on these little sh*ts (not the same type as in the picture, but baldy-made longer “bands” that leave little plastic spikes on the cap and/or band).

No idea whether I should post this in the “unpopular opinion” section instead or if other people think the same, but to me, “mildly infuriating” describes them perfectly.

  • L0rdMathias@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    31
    ·
    4 months ago

    You can rotate the bottle before taking a sip to position it such that the cap doesn’t hit your face. You can also pour liquid out of the bottle without having it run into the cap using the same rotation technique before pouring.

      • Vinny_93@lemmy.world
        link
        fedilink
        English
        arrow-up
        9
        ·
        4 months ago

        Just like not throwing the cap at some helpless plant when going to the supermarket recycling the bottle

    • Ekky@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      12
      ·
      4 months ago

      I had quite some beef with the tethered caps in the beginning when they didn’t latch properly, but have since gotten used to them. That said:

      • Cap on top -> Funny hat for nose!
      • Cap on bottom -> Beard gets to take a moist nap.
      • Cap on sides -> Mustache also gets to take a sip!

      Obviously not much of a problem. I’d need to clean my facial hair either way if eating ice cream or other messy foods, but cap rotation might not be effective if your “face” sticks out 1-2cm from your mouth.

      One could also attempt to rotate the cap in a way to achieve quantum tunneling, but I don’t feel that I’ve achieved that level of “tethered cap proficiency” yet.

    • redisdead@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      4 months ago

      I just rip them off. It’s a straight up pointless thing designed solely to annoy people while providing no benefit whatsoever.

      People who defend that kind of shit probably believe that plastic straws were going to be the downfall of humanity.

    • leftzero@lemmynsfw.com
      link
      fedilink
      English
      arrow-up
      3
      ·
      4 months ago

      You can rotate the bottle before taking a sip to position it such that the cap doesn’t hit your face.

      And gravity will make the cap spin around, hit your face, get in the way of the liquid, and make it splash everywhere but your mouth.

      You can also pour liquid out of the bottle without having it run into the cap using the same rotation technique before pouring.

      Same issue. As soon as you tip the bottle the cap will spin (apparently whatever genius designed this useless annoyance didn’t realise that bottle necks are cylindrical), get in the way of the liquid, and make it spill everywhere but the container you’re trying to pour it into.

      They’re like a Pythagorean cup without the temperance lesson and well thought out design.

      The only way to use these without wasting 99% of the liquid and making a mess is to either awkwardly try to hold them up as you pour, or to violently rip them out before pouring in an entirely justified fit of righteous rage.

      What an utterly infuriating waste of plastic, time, and money.

      • breadsmasher@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        4 months ago

        Does america have terrible bottle designs or something? Not one single bottle with tethered cap has ever freely spun, you can move it and it stays in that position

        • leftzero@lemmynsfw.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          4 months ago

          Luckily I’m not American, but I’ve never seen one of these contraptions that didn’t spin freely (and most of the ones I’ve seen spin freely and dangle all over the place, since the cap is tethered to the ring with a flexible strip of plastic).

          It’s a weight attached to a ring placed around a cylinder, after all. It’s bound to spin freely, it’s inherent to the design.

          • breadsmasher@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            The ones I am talking about don’t move under their own weight and gravity. If you held it with the cap upwards, it doesn’t rotate downwards unless you do it yourself

            hence why getting hit in the face and struggling with a little cap is so puzzling to me

      • entropicdrift@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        Y’know how you hold the bottle with your hand to lift it? Believe it or not, you can hold it by the neck, and even slightly touching the little plastic ring the cap is tethered to will keep it from spinning.

        • leftzero@lemmynsfw.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          4 months ago

          Y’know that physics principle called the lever principle, or principle of moment…?

          Thing is, if you grab a bottle by the neck and try to tilt it, you have to deal with the whole momentum / mass of the bottle, which is a significant amount of torque on your wrist, especially if you’re awkwardly trying to hold a cap that’s clearly not designed to be held this way at the same time.

          If you instead violently rip the cap out in an entirely justified fit of righteous rage and grab the bottle by it’s center of mass, as normal people do and have done since bottles have existed (well, except for the cap bit; that shit is rather new), you can effortlessly spin it to whatever angle you want, with perfect control all the way.

          Of course you can always hold it with two hands, which might be what you meant, but that’s a rather stupid waste of a free hand when most bottles are designed to be holdable with one single hand.