Sounds like an issue with your WiFi adapter/driver. You can verify this by creating a mobile hotspot on your phone and connecting your PC to it and see if you get the same issue, if you do then it proves it’s got nothing to do with your router.

Another thing you can check is your journalctl logs - run journalctl -f before launching the game, then run the game and quit it when you run into the DNS issue, and check the logs at the time the issue occurred. If there’s indeed a hardware/driver issue, the errors should show up in the logs.

If it’s a driver issue, there may not be much you can do about it besides reporting the bug and implementing some sort of workaround (eg using a VPN). Of course, depending on the error, there may be a fix you can apply, like turning of aspm for your chip. A better option would be to replace the WiFi chip/adapter you’re using and get something that’s better supported under Linux, like something with an Intel or Atheros chip. But check journalctl first and see how it goes from there.

If you want to make it fancy we could do a presentation type thing, like via slidesgo.com or similar, but since this is on/for Lemmy, I think we should just keep it simple and make it a normal post.

Woah, can’t believe it’s been an year already!

For the anniversary day, maybe we could have a post showcasing a few highlights of our community over the past year, something like Spotify’s Wrapped, but for Lemmy - so maybe a highlight of the most upvoted posts/comments, most profilic posters, membership counts, major server changes and little victories (maybe share some of your experiences in keeping the ship afloat)?

You cannot go back after trying it

I did! Used to have a Samsung 49" ultrawide. After using it for a couple of years, I sold it and got a 16:10 32" QHD, which I found worked better for me (+ one or two laptop screens for chat / random stuff when I’m doing serious work).

The biggest issue I had with the ultrawide is that most of the games that I played weren’t optimised for it, especially in some games where things like the mini-map might be at the far end of the screen, or worse, if it was an older game then you’d have to put up with black bars, or play the game in windowed mode.

You can already run Linux apps using Termux and Termux-X11, and I’d say the performance would be better than this demo, because this is running in a virtual machine and uses it’s own kernel, whereas with Termux you’re running your apps directly on top of the Android Linux kernel. Also, you don’t have the overhead of running ChromeOS on top of Android.

I don’t play D4 anymore so I can’t say if this still works, but back when I did, I used to launch it (ie the Battle.net launcher) from Steam, as a non-Steam game.

I also used the latest Proton-GE as the compatibility tool, so that’s something you could try as well.

Aurora australis!? At this time of year, at this time of day, at this part of the country, localized entirely in the southern hemisphere?!

I haven’t heard of Hot Shot, but 200-400GB seems like reasonable usage to me. Especially taking into account 4K streaming, and stuff like video game downloads being 100+GB, that figure actually would seem pretty conservative IMO.

Because MIUI deviates from stock Android so much that it often causes unexpected behaviour and bugs. So it’s easier for developers to just say they don’t support it, instead of putting up with negative reviews and complaints.

Nice, welcome to the club! Been using a ThinkPad Z13 for the past couple of years exclusively with Linux (Fedora Atomic) and it has been an excellent experience, with everything working OOTB and decent battery life too. I do have a copy of Windows installed in a VM, but use it only for dev/test stuff.

The answers here are only partially correct. If you want to use your device internationally, there are four things or categories you need to consider:

1. Carrier locked devices
2. Region-specific devices
3. Carrier whitelisting
4. Regulatory requirements

Carrier locked devices are exactly that, these are the ones sold by your carrier and subsidised, they usually mention that you can’t use them with other carriers. Eg the SM-S928U of the S24 works only on AT&T. If you have one of these, you may be able to buy an unlock code online to unlock your phone. Depending on your model, you might also need to flash compatible firmware or unlock additional bands from the service menu, if you want to be able to actually use it with your destination carrier.

Region-specific devices generally have limited cellular bands, meant for usage in that country. Eg although the SM-S928U1 variant of the S24 is factory unlocked (unlike the SM-S928U), it may not carry all the bands required for operation outside the US. If you’re unsure about compatibility, use this website to check the bands for your target country/carrier. Generally though, if you travel a lot, it’s recommend to buy the international / global variant of a phone. As an alternative, if you have a US variant Samsung, you could use the service menu to enable all bands. Though regardless of the variant, it’s always a good idea to check the band compatibility before you purchase the device/travel.

Carrier whitelisting is a recent annoying thing which carriers have started doing for some technologies such as 5G, VoLTE, VoWiFi etc. Some of these features may or may not be critical for you, for eg, if the destination carrier no longer offer 2G/3G services, that means you must be able to get VoLTE in order to make calls. And VoWiFi is needed if you’re in an area with poor reception, but have WiFi access. Finally, 5G would be a bonus thing but most carriers allow only whitelisted models to connect to their 5G services. Samsung normally should work in general, but given how many variants Samsung makes, there’s no guarantee that your specific variant would be able to use some/all of these services. So you’ll need to check with your target carrier in advance to see which of their services your phone would be able to support.

Finally, some countries may have regulatory requirements which may legally prevent shops/carriers from selling you a SIM card, if your phone isn’t in their database. For instance, in Japan, it’s technically illegal to operate a device without a “giteki” mark - and if your phone doesn’t have this, operators may refuse to sell you a card. In this case however, you should be fine if you order a compatible SIM/eSIM online before arrival (eg from Sakura Mobile).

It’s easiest to just register a domain name and use Couldflare Tunnels. No need to worry about dynamic DNS, port forwarding etc. Plus, you have the security advantages of DDoS protection and firewall (WAF). Finally, you get portability - you can change your ISP, router or even move your entire lab into the cloud if you wanted to, and you won’t need to change a single thing.

I have a lab set up on my mini PC that I often take to work with me, and it works the same regardless of whether it’s going thru my work’s restricted proxy or the NAT at home. Zero config required on the network side.

This shouldn’t even be a question lol. Even if you aren’t worried about theft, encryption has a nice bonus: you don’t have to worry about secure erasing your drives when you want to get rid of them. I mean, sure it’s not that big of a deal to wipe a drive, but sometimes you’re unable to do so - for instance, the drive could fail and you may not be able to do the wipe. So you end up getting rid of the drive as-is, but an opportunist could get a hold of that drive and attempt to repair it and recover your data. Or maybe the drive fails, but it’s still under warranty and you want to RMA it - with encryption on, you don’t have to worry about some random accessing your data.

GSIs are the way to go these days for anything that’s not a Pixel. I’m not sure if there’s a fully-degoogled GSI out there though, but you can check the list here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list

Or here: https://xdaforums.com/f/treble-enabled-device-development-a-ab-roms.7260/

And once you found a GSI you like, install using the instructions here: https://github.com/phhusson/treble_experimentations/wiki/Samsung

But it’s best to check XDA forums as well for any device-specific quirks.

I have, actually. I’ve converted both my elderly parents and aunt and uncle, over a decade ago, to Linux. They were first running Xubuntu, and now they’ve been running Zorin for the past couple of years. Both of them use an pure-Intel PC/laptops (no nVidia, no proprietary drivers) and they have zero issues. All they need is a browser for Facebook/email/etc, some light document editing, and the occasional prints/scans.

Linux works 100% perfectly for their needs, since all they’re doing is basic computing tasks. In fact the whole reason why I switched them over in the first place back then was because I got tired of doing tech support every time their Windows crapped out.

Why do you assume you’re going to do tech support? Does your MIL have any specific proprietary software or hardware requirements?

Like I cant reasonably put my MIL on a linux laptop that I put together for her and expect her to have a good experience

Why not?

It’s already a reality: https://www.unihertz.com/collections/jelly-series

My only issue is that it’s not Snapdragon and not quite dev/root friendly, but otherwise it ticks all the boxes - including a 3.5mm jack and an IR Blaster!

Not a dumbphone, but Unihertz makes some actually small phones - like ones that can fit completely in your palm. These things are great to have as a backup phone, or something you can take with you while you go out for a run or the gym.

https://www.unihertz.com/collections/jelly-series