I spent all day today trying to get the routing to work correctly between Tailscale, Nginx and Adguard.

Basically I wanted to be able to be able to use **http://immich.network ** to route to 192.168.1.2:9000

I wanted to share the steps I took so people don’t have to go through what I did.

First a few things Local Server IP: 192.168.1.2

  1. I installed Ngnix and Adguard, in a Docker Containers, and gave Adguard IPs 3000, 3001 instead of 80 and 443 because Ngnix took it.
  2. I went to my router and made it use the DNS: 192.168.1.2
  3. I configured Proxy Host in Ngnix … immich.network => 192.168.1.2:9000
  4. I configured DNS rewrite in Adguard … *.network => 192.168.1.2

At this point I was able to use http://immich.network finally. I installed Tailscale to be able to access when I’m outside but http://immich.network didn’t work.

These helped me https://tailscale.com/kb/1019/subnets + https://tailscale.com/kb/1054/dns?q=global+nameserver

  1. I created a subnet… tailscale up --advertise-routes=192.168.1.0/24
  2. I approved it on Tailscale login

At this point I was able to access home server using its local IP 192.168.1.2 but I couldn’t get http://immich.network to work.

  1. I created a nameserver dns with split DNS but I used my local ip… 192.168.1.2 => network

Finally everything is working… I have a feeling that I’m doing it wrong but I’m too tired and it’s finally working.

  • Mir@programming.devOPEnglish
    1·
    6 months ago

    I used chatgpt to create the exact steps, commands and configurations I needed for my setup and achieved this the seemingly cheatful way. I used nginx and certbot. Worked like a charm. Congrats!

    It’s impressive that you was able to get it to help you correctly. It usually just spew things i need to fix that’s why I didn’t ask him, thank you for the tip.

    Btw did you use a custom local domain name or did you use an actual domain ?

    • dutchkimble@lemy.lolEnglish
      0·
      6 months ago

      Thanks, it took some prompts but it worked in the end! I used a few subdomains of an actual domain I use for email…

      • Mir@programming.devOPEnglish
        0·
        6 months ago

        I just finished the SSL today, but have you gotten Syncthing GUI to work though? I can’t seem to get it to work with the domain for some reason.